| Tip |
|---|
Complete the required workflow configuration according to your business scenario. Before embarking on your data synchronization journey, please make sure to configure the issue type, otherwise it cannot proceed. When the issue type is not configured, the "Workflow Configuration" tab cannot be used (note: Epic and subtask types are not currently supported). |
#Entrance
The administrator logs in to the Jira system, clicks on the gear icon, selects "Manage apps" (as shown in Figure 1) and then finds the "SYNC TO JIRA" plugin menu.(as shown in Figure 2)
...
...
Click on "Project Configuration" to enter the "Project configuration" page.The "Project configuration" screen is as follows:
...
Click the "Add" button on the upper right of the "Workflow Configuration" page and the lower screen will pop up.(As shown in Figure 3 below)
Step 1:
...
...
...
Step 2:
...
Step 3:
...
Local workflow: Required, Workflow of the local Jira system.(As shown in Figure 3 above)
Target workflow: Required, Workflow of the target Jira system.(As shown in Figure 3 above)
Apply to all local issue types: Checked by default. If unchecked, you can select the issue type to be specified.(As shown in Figure 4 above)
Local workflow status mapping: Not required. The status can be mapped according to the actual situation.(As shown in Figure 5 above)
Target workflow status mapping: Not required. The status can be mapped according to the actual situation.(As shown in Figure 6 above)
...
| Note |
|---|
Note: You can only edit local or target workflow mappings when editing the workflow configuration.If data synchronization is in progress, the field configuration cannot be modified.This problem solution can be found here: Q&A 3.1 |
3、Delete the workflow configuration
Click the "Delete" and the following screen will pop up.
...
| Note |
|---|
Note: If data synchronization is in progress, the workflow configuration cannot be deleted.This problem solution can be found here: Q&A 3.1 |
4、Status mapping
For the convenience of viewing the configuration data of status mapping, hover the mouse over the "Status Mapping" and the following screen will pop up.
...